Model | WAC6503D-S | WAC6502D-S | ||
---|---|---|---|---|
Product description | 802.11ac Dual Radio Smart Antenna 3x3 Access Point |
802.11ac Dual Radio Smart Antenna 2x2 Access Point |
||
Main Design | ||||
Wireless frequency | 2.4 and 5 GHz | 2.4 and 5 GHz | ||
Radio | 2 | 2 | ||
RF Specifications | ||||
Frequency band | 2.4 GHz (IEEE 802.11 b/g/n)
|
|||
802.11n/ac premium features |
|
|
||
Typical transmit output power(Conducted) | FCC 11b/g | 29 | 28 | |
FCC 11g/n | 29 | 28 | ||
FCC 11a | 30 | 28 | ||
FCC 11n/a (ac) | 30 | 28 | ||
EU 11b/g | 15 | 14 | ||
EU 11g/n | 15 | 14 | ||
EU 11a | 23 | 22 | ||
EU 11n/a (ac) | 23 | 22 | ||
Number of antenna | 6 embedded smart antenna | 4 embedded smart antenna | ||
Antenna gain | 4 dBi @2.4 GHz 6 dBi @5 GHz |
4 dBi @2.4 GHz 6 dBi @5 GHz |
||
Support data rate |
|
|
||
Receive sensitivity | Min. Rx sensitivity up to -102 dBm | Min. Rx sensitivity up to -100 dBm | ||
Interfaces | ||||
Number of 10/100/1000M LAN | 2 | 2 | ||
Console Port | RJ-45 serial | RJ-45 serial | ||
PoE | Yes | Yes | ||
PoE power draw | 17.04 W | 15.12 W | ||
WLAN Features | ||||
WLAN maximum throughput | Up to 900 Mbps | Up to 600 Mbps | ||
Mesh AP (By license)*1 | Yes*1 | Yes*1 | ||
Mesh AP for multiple SSID with VLAN(through tunnel mode)*1 | Yes*1 | Yes*1 | ||
Wireless Security | ||||
WEP | Yes | Yes | ||
WPA/WPA2-PSK | Yes | Yes | ||
WPA/WPA2-Enterprise | Yes | Yes | ||
WMM (Wi-Fi certified) | Yes | Yes | ||
EAP types | EAP-TLS, EAP-TTLS, EAP-PEAP, EAP-FAST, EAP-AKA and EAP-SIM | |||
IEEE 802.1X | Yes | Yes | ||
Number of SSID | 16 | 16 | ||
Web authentication*1 | Yes | Yes | ||
MAC filtering | Yes | Yes | ||
Layer-2 isolation | Yes | Yes | ||
RADIUS authentication | Yes | Yes | ||
Microsoft AD authentication*1 | Yes | Yes | ||
LDAP authentication*1 | Yes | Yes | ||
MAC authentication*1 | Yes | Yes | ||
Rogue AP detection*1 | Yes | Yes | ||
Rogue AP containment*1 | Yes | Yes | ||
Network | ||||
IPv6 host | Yes | Yes | ||
VLANs | Yes | Yes | ||
DHCP client | Yes | Yes | ||
QoS (PG) | ||||
WMM | Yes | Yes | ||
WMM power save | Yes | Yes | ||
DiffServ marking | Yes | Yes | ||
Management | ||||
ZON utility*2 |
|
|||
Smart connect |
|
|||
ZyXEL AP configurator*2 |
|
|||
ZyXEL wireless optimizer |
|
|||
Standalone AP mode | Yes | Yes | ||
Managed AP mode | Yes | Yes | ||
CLI | Yes | Yes | ||
Web UI | Yes | Yes | ||
SNMP | v1/2c/3 | v1/2c/3 | ||
Others | ||||
Plenum rating | Yes | Yes | ||
Kensington lock support | Yes | Yes | ||
Input power |
|
|||
MTBF (hr) | 1,202,489 | 1,407,374 | ||
Standard Compliance | ||||
Ethernet |
|
|||
PoE | IEEE 802.3at*4 | |||
WLAN |
|
|||
Certifications | ||||
Radio | FCC Part 15C, FCC Part 15E, ETSI EN 300 328, EN 301 893, LP0002 | |||
EMC | FCC Part 15B, EN 301 489-1, EN 301 489-17, EN55022, EN55024, EN61000-3-2/-3, EN60601-1-2, BSMI CNS13438 |
|||
Safety | EN 60950-1, IEC 60950-1, BSMI CNS14336-1 | |||
Physical Specifications | ||||
Item | imensions (WxDxH)(mm/in.) | 236 x 227 x 62/9.28 x 8.95 x 2.43 | 236 x 227 x 62/9.28 x 8.95 x 2.43 | |
Weight (g/lb.) | 982/2.17 | 961/2.12 | ||
Packing | Dimensions (WxDxH)(mm/in.) | 308 x 323 x 127/12.13 x 12.72 x 5.00 | 308 x 323 x 127/12.13 x 12.72 x 5.00 | |
Weight (g/lb.) | 1743/3.85 | 1722/3.81 | ||
Included accessories |
|
|
||
Environmental Specifications | ||||
Operating | Temperature | 0°C to 50°C/32°F to 122°F | ||
Humidity | 10% to 90% (non-condensing) | |||
Storage | Temperature | -40°C to 70°C/-40°F to 158°F | ||
Humidity | 10% to 90% (non-condensing) |
*1: Features supported when working with ZyXEL NXC controller series (ZyMesh on FW 4.20 for WAC6500 Series is Beta function, the official release will be available at next major release.)
*2: Features supported on Standalone AP mode
*3: WAC6500 series is able to be controlled by USG/UAG embedded APC(AP controller) in future release. USG/UAG supporting ZON utility is scheduled in future release.
*4: Compatible with 802.3af mode with restricted function: 1x3 MIMO or 1x2 MIMO with 1 spatial stream